Fiberglass Pool Resurfacing and Repair

Fast and Inexpensive Fiberglass Gel Coat Paint Repair

Click a thumbnail to launch full size picture

BEFORE AFTER FILLED

Testimonial...

Lynette and I wanted to thank you for all of your help with our many questions along our journey of pool restoration.

Thanks again!
Darrell Perry, Hampstead, NC

View More Photos and Testimonials by Clicking Here

Now you can relax begin to enjoy your fiberglass swimming pool once again!

Resurfacing or refinishing has never been easier or less expensive than today, thanks to the ^®UGlassIt Pool Resurfacing System. It is designed for older fiberglass swimming pools in need of repairs, to stop leaking and refinish the fiberglass gel coat to make it beautiful and care-free once again.

All fiberglass containments can benefit using Fibre-Shelkote™ gel coat and vinyl ester resin products developed for use with the UGlassIt Pool Resurfacing System. Most containments like swimming pools and hot tubs can be made to look and act like brand new with just a new gel coat coating. Only in extremely rare instances would new resin or fiberglass be necessary.

The UGlassIt resurfacing system was developed in 1999 for the do-it-yourself (DIY) residential pool owner. Fiberglass pool refinishing with swimming pool gel coat is the only solution for older fiberglass pools.

Cheap Do-it-Yourself Prices

Every fiberglass swimming pool more than 15 years old is a candidate for the UGlassIt Resurfacing and Refinishing System utilizing Fibre-Shelkote pool products exclusively.

Every fiberglass swimming pool will develop cosmetic problems and will be in need of refinishing after *15 to 20 years. These problems are nearly always limited to the top layer of gel coat, also called "fiberglass pool paint".

If the pool was mistreated or damaged causing leaks, then our Fibre-Shelkote resin and gel coat products will repair it, make it watertight, and make it beautiful and maintenance free once again.

The inexpensive and total solution to fiberglass pool and hot tub problems is now available to residential owners. Click here for complete fiberglass resurfacing instructions and prices.

*Except San Juan Fiberglass Pools which will last about 30 years before needing gelcoat.

View our factory direct Prices

This is a web site of ®UGlassIt Pool Resurfacing, Inc.

Pool and Hot Tub Resurfacing
Fibre-Shelkote™ Distributors
67 Buck Road
Suite 140 Box B-43
Huntingdon Valley, PA 19006

The ^®UGlassIt System with Fibre-Shelkote Products has been used throug
hout the United States by owners, pool pro's and contractors.

Countries include Canada, Nova Scotia, Bahamas, Granada, U.S. Virgin Islands, British West Indies, Jamaica, St. Croix, and the U. S. Marine base at Guantanamo Bay.

Home Improvement Home Improvement at My Garden: Home and building tips and tricks. Gardening and Landscaping Forum.

Visit DoItYourself.com - The Leading Home Improvement and Remodeling Website Featuring the Internet's Largest Hardware Superstore

Page last updated on Sunday, November 2, 2008