This is a new fiberglass swimming pool just lowered
into the ground
This is a used
fiberglass swimming pool after 30 years of faithful
This is the same
30 year old pool after DIY refinishing by the pool
Not All Fiberglass Pools Are Created Equal!
Based on more than 20
years in the swimming pool restoration industry, I can
recommend only one fiberglass pool manufacturer unconditionally.
The finest fiberglass pools manufactured in the United
San Juan Pools.
Refinishing will not be required (under normal conditions)
for about 30 years.
On the other extreme is the worst pool manufacturer
located in the U.S. These pools will often require refinishing
within 3 to 4 years after installation.
In between these two extremes are the balance of the
fiberglass pools manufactured in the U.S. Typically,
a reasonably cared for fiberglass pool will need new
swimming pool gel coat once every 20 years.
Fortunately, this problem is now easily solved with
Fibre-Shelkote tm vinyl ester
resin and swimming pool gel coat, made specifically
for fiberglass swimming pools, fiberglass pool linings,
spa's, hot tubs, sliding boards. and baptistery.
Any pool owner willing to put forth the effort can make
their old fiberglass pool look like brand new again.
Read this before emptying
your swimming pool.
Hot Tub Resurfacing
607 Louis Drive Suite
Warminster, PA 18974
is a registered mark of ®UGlassIt Pool Resurfacing,
is a trademark of Fibre-Shelkote Products,
US Military Personel - Active Duty
Law Enforcement and Firemen - Active & Retired
Copyright © 2003-2013 All rights
Page last updated on
Thursday, January 02, 2014